Set Up Lacp Port Priority And Time-Out Values - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E
To change the LACP system priority:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
6.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select System > LAG > LACP Configuration.
The LACP Configuration page displays.
6. In the LACP System Priority field, enter a number from 1 to 65535.
The default is 32768.
7. Click the Apply button.
Your settings are saved.

Set Up LACP Port Priority and Time-Out Values

You can set the LACP port priority value and LACP time-out value for a port. By default, the LACP port
priority value for a port is 128 and the time-out value is Long.
To specify LACP port priority value and LACP time-out value for a port:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
6.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
Access the Switch Using a Web Browser
Access the Switch Using a Web Browser
Manage Network Settings
21
on page
on page