48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E
You can select Port PVID only if you already enabled the advanced 802.1Q VLAN option (see
802.1Q-Based VLANs in an Advanced Configuration
7.
Select one or more ports.
8.
Enter the PVID.
You can enter a PVID only for a VLAN that already exists.
9.
Click the Apply button.
Your settings are saved.
Manage the Voice VLAN
The switch supports a voice VLAN to facilitate voice over IP (VoIP) traffic. If you enable the 802.1Q VLAN
mode (see
Create 802.1Q-Based VLANs in a Basic Configuration
VLANs in an Advanced Configuration
the voice VLAN is ID 2, which you can change.
For more information, see the following sections:
•
Specify the Voice VLAN Properties
•
Enable the Voice VLAN Mode for Ports
•
Manage the OUI Table
on page 28), the voice VLAN is enabled by default. The default ID of
on page 33
on page 33
on page 35
Use VLANS for Traffic Segmentation
on page 28).
on page 27 or
32
Create
Create 802.1Q-Based