Manage The Port Speed And The Port Status - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E

Manage the Port Speed and the Port Status

By default, the port speed on all ports is set automatically after the switch determines the speed using
autonegotiation with the link partner. You can select a specific port speed setting for each port, or disable
a port by shutting it down manually.
To manage the port speed and the port status:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
6.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select System > Management > Port Status.
6. Select one or more ports.
7. In the Speed menu, select one of the following options:
Access the Switch Using a Web Browser
Manage and Monitor the Switch
51
on page