Roland CM-500 User Manual page 5

Do not attempt to unplug the power
cord with wet hands.
Doing so may
result in electrical
shock.
When unplugging the electrical
power cord from a power outlet,
grasp the plug, not the cord.
Unplugging by
pulling the cord
may damage it,
leading to fire or
electrocution.
Do not injure or modify the electrical
power cord, nor subject it to exces-
sive bends, twists, pulls, binding, or
pinching, nor place any object of
weight on it.
Doing so may
damage the electri-
cal power cord,
leading to electrocu-
tion or fire.
Do not allow liquids, metal objects
or flammables inside the machine.
Such materials
can cause fire.
Do not touch the tip of the blade
with your fingers.
Doing so may result in injury.
Make sure the power to the unit is
off before attempting to replace the
separating knife.
Doing so may result in injury.
Do not use with a damaged power
cord or plug, or with a loose electri-
cal outlet.
Use with any other
power supply may
lead to fire or
electrocution.
When not in use for prolonged
periods, unplug the power cord from
the electrical outlet.
Failure to do so may
result in danger of
shock, electrocution,
or fire due to
deterioration of the
electrical insulation.
Unpacking, installing, or relocating
the unit are operations which must
be carried out by two or more per-
sons holding the unit at its bottom
surface on the left and right sides.
Failure to do so may
result in dropping
the unit, leading
to injury.
Do not place hands near the platen
while in operation.
Doing so may result in injury.
Install in a level and stable location.
Otherwise the unit may tip over and cause
injury.
3