Roland CM-500 User Manual page 16

Material Loading Position
Material
54" (approx.1372 mm)
CM-500
CM-400
CM-300
* Acceptable material widths
50—540 mm (2"—21" ) ,
582—915 mm (23"—36" )
14
36" (approx.914 mm)
48" (approx.1219 mm)
The right-hand movable pinch roller can be moved within this range.
When loading material with a width other than one indicated above,
move the right-hand movable pinch roller.
Material with Material with
Material with
a width of 36" a width of 30"
a width
of 48" and 54"
* Make sure the pinch rollers are positioned above the grit rollers.
(1*) Position of the pinch roller (middle) when using material with a width of 30" or 36"
(2*) Position of the pinch roller (middle) when using material with a width of 48" or 54"
Material with Material with
a width a width of 30"
of 36" and 46"
* Make sure the pinch rollers are positioned above the grit rollers.
(1*) Position of the pinch roller (middle) when using material with a width of 30" or more.
Material with
a width
of 24" and 30" and 36"
* Make sure the pinch rollers are positioned above the grit rollers.
:Grit Roller
:Movable Pinch
Roller (Left)
18" (approx.457 mm)
24" (approx.610 mm)
30" (approx.762 mm)
Material with Material with
a width of 24"
a width of 18"
(1*)
(2*)
54" (approx.1372 mm)
Material with Material with
a width of 24" a width of 18"
(1*)
46" (approx.1178 mm)
Material with
a width of 18"
36" (approx.915 mm)
* The CM-300 has no middle pinch roller.
: Movable Pinch
Roller (Middle)
: Movable Pinch
Roller (Right)
6" (approx.152 mm
12" (approx.305 mm)
Material with Material with
a width of 12" a width of 6"
Material with
Material with
a width of 12"
a width of 6"
Material with Material with
a width of 12"
a width of 6"