Advertisement
1 Safety Instructions and General Warnings
Do not carry the drive by the front cover.
Failure to comply may result in minor or moderate injury from the main body of the
drive falling.
Do not touch the heatsink or braking resistor hardware until a powered-down
cooling period has elapsed.
Observe proper electrostatic discharge procedures (ESD) when handling the drive
and circuit boards.
Failure to comply may result in ESD damage to the drive circuitry.
Never connect or disconnect the motor from the drive while the drive is outputting
voltage.
Improper equipment sequencing could result in damage to the drive.
Do not perform a withstand voltage test on any part of the drive.
Failure to comply could result in damage to the sensitive devices within the drive.
Do not operate damaged equipment.
Failure to comply could result in further damage to the equipment.
Do not connect or operate any equipment with visible damage or missing parts.
Install adequate branch circuit short circuit protection per applicable codes.
Failure to comply could result in damage to the drive.
The drive is suitable for circuits capable of delivering not more than 100,000 RMS
symmetrical Amperes, 240 Vac maximum (200 V Class) and 480 Vac maximum (400 V
Class).
EN 8
CAUTION
Crush Hazard
Burn Hazard
NOTICE
Equipment Hazard
YASKAWA ELECTRIC TOEP C710606 15E - AC Drive V1000 - Quick Start Guide
Hide quick links:
Advertisement
