Loss Results For Far End Source Mode - Fluke DSP-FTA420 User Manual

Table 6. Loss Results for Far End Source Mode
Result
PASS/FAIL
Loss (dB)
Limit (dB)
Cable length and
wavelength
A-B or B-A
Reference
Date and time
Autotest Results for Far End Source Mode
Pass means the power loss is less than allowed
by the limit.
Fail means the loss exceeded the limit.
The measured optical power loss.
The maximum allowable loss for the selected
standard.
The fiber type and wavelength selected before the
Autotest was performed.
The direction of the test. To set the direction,
press
@ Options; then select the desired direction.
The current reference value. See the earlier
section "Setting a Reference for Far End Source
Mode" for information.
The date and time the reference was set.
Fiber Test Adapter
Description
29