Autotest Results For Far End Source Mode - Fluke DSP-FTA420 User Manual

DSP-FTA420/30/40
Users Manual

Autotest Results for Far End Source Mode

An Autotest using Far End Source Mode measures loss for singlemode or
multimode fibers.
The Autotest runs continuously until the e key is pressed. Table 6 describes
the results.
The results display also features softkeys that are available only for Far End
Source Mode:
•
Options: Lets you set the direction of the test (A-B or B-A).
•
Power: Lets you measure optical power at the selected wavelength.
28