Loss Results For Smart Remote Mode - Fluke DSP-FTA420 User Manual

Table 2. Loss Results for Smart Remote Mode
Result
Fiber
Direction
(A-B or B-A):
Result
Loss (dB)
Limit (dB)
Margin (dB)
Autotest Results for Smart Remote Mode
The fiber (output or input) that corresponds to the
test results.
If bi-directional testing is enabled, the output fiber
is the fiber you connected to the output port of the
main unit after swapping the fibers.
Direction A-B runs from the main unit to the
remote; B-A runs from the remote to the main unit.
Only displayed if Bi-directional testing is enabled.
PASS means the power loss is less than allowed
for the link.
FAIL means the loss exceeded the limit.
The measured power loss. Loss is automatically
measured at wavelengths.
The maximum loss allowed by the selected test
standard. For some standards, the limit is
calculated using the numbers of adapters and
splices you entered and the losses allowed for
these by the test standard.
The difference between the limit and the measured
loss. This number is negative if the link failed.
Fiber Test Adapter
Description
23