Table of Contents
Advertisement
DSP-FTA420/30/40
Users Manual
Length Results for Smart Remote Mode
The test tool determines fiber length by measuring the propagation delay
through the fiber, then using the index of refraction to calculate the length.
Table 3 describes the length results for Smart Remote Mode.
Table 3. Length Results for Smart Remote Mode
Result
Length
The length of each fiber.
Limit
The maximum length the test standard allows for one fiber.
Result
Pass means the measured length is less than the limit.
Fail means the length exceeds the limit.
When there is too much loss to determine length, the length is
reported as a question mark.
24
Description
Note
Hide quick links:
Advertisement
Table of Contents
