Getting Started - Fluke DSP-FTA420 User Manual

Getting Started

This section describes how to connect the DSP-FTA4XX units and verify their
operation.
Attach a DSP-FTA4XX unit to your DSP-4000 test tool, as shown in Figure 3.
Attach the matching DSP-FTA4XX unit to the DSP-4000 remote unit. The
DSP-FTA4XX units with the same model number are identical, so either one
can be attached to the remote.
The DSP-FTA4XX Fiber Test Adapters are compatible only with
DSP-4000 test tools and remote units.
Do not mix the model types of the Fiber Test Adapters at the main
and remote units. While no damage will result, the units will not
operate when mixed.
This manual assumes that you have used the DSP-4000 test tool to
test copper cable. If you need more detailed instructions about using
the DSP-4000 test tool, refer to the DSP-4000 Users Manual.
Notes
Figure 3. Attaching a DSP-FTA4XX
Fiber Test Adapter
Getting Started
tt02f.eps
5