When The Oven Is Working - Smeg SU45VCX1 Instructions For Use Manual

Combi steam oven

Hide thumbs

Table Of Contents

Table of Contents

TYPE OF

PROGRAM

FOOD

r 3

BEANS

r 4

CHERRIES

r 5

PLUMS

BABY

r 6

BOTTLES

8.1.11

Delayed Start Time

When PT1 is pressed to define a delayed start time the corresponding

light

starts to blink, DSP1 shows the current time and DSP 2 shows

"Auto".

Turn PT1 to the right or left to change the delayed start time.

Press PT2 to validate the delayed start time.

The oven enters in an idle state waiting for the defined start time. DSP3

shows the selected function and DSP1 and DSP2 show all the defined

parameters for the function continuously alternating.

If you wish to start the function before the selected time, just press PT2.

If you wish to cancel the programming, press PT2 for 3 seconds.

8.2

IT IS NORMAL THAT SOME STEAM ESCAPES THROUGH THE

OPENING BETWEEN THE DOOR AND CONTROL PANEL DURING THE

HEATING PERIOD. THE AMOUNT OF RELEASED STEAM WILL BE

REDUCED WHEN THE OVEN REACHES THE SET TEMPERATURE.

8.2.1

Interrupting a cooking cycle

You can stop the cooking process at any time by pressing the PT2 key

once or by opening the oven door.

The oven incorporates a steam-reduction function that is activated when

the Start/Stop key is pressed to gradually release the steam from the

cavity, so that there is no sudden rush of steam when the appliance door

is opened.

This function takes around 3 minutes and during it the display shows the

word "VAP".

WARNING! WHEN OPENING THE DOOR DURING OR COMPLETION

OF THE COOKING CYCLE WITHOUT STOPPING IT AS DESCRIBED

ABOVE BE CAREFUL OF THE FLOW OF HOT AIR AND/OR STEAM

COMING OUT OF THE COOKING CHAMBER. STEP BACK OR TO THE

SIDE TO AVOID BURNS.

At this point:



Instructions for the User

TEMPERATURE

ºF

212

176

194

212