When The Oven Is Working; Interrupting A Cooking Cycle; Altering Parameters; End Of A Cooking Cycle - Smeg SC445MCX Instructions For Use Manual

When the oven is working...

Interrupting a cooking cycle

You can stop the cooking process at any time by
pressing the Stop key once or by opening the
oven door.
In both cases:
Microwave emission
immediately.
The grill is de-activated but is still very hot.
Danger of burning!
The timer stops automatically, indicating the
operating time that is left.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will be
evenly cooked.
2. Change the process parameters.
To restart the process, close the door and press
the Start key

Altering parameters

The function and temperature can be altered
when the oven is operating or when the cooking
process has been interrupted by simply turning
the respective knob to the new setting.
To change power level and operating time, please
is stopped
proceed as follows:
Cancelling a cooking cycle
If you wish to cancel the cooking process, rotate
the Function Selector until zero or press the
Stop key twice.

End of a cooking cycle

When the set time has elapsed, the oven beeps
and the Display shows END.
If you have finished the cooking process, turn the
function selector and the thermostat to zero.
Press the "+" and "-" keys to change
-
directly the operating time.
- Press the Ok key to enable power change.
The Power Level Indicator starts to flash.
Press the "+" and "-" keys to change the
-
power level.
- Press the OK key.
EN
14