Job Button Screen - Canon ScanFront 400 Instructions Manual

❏ Job Button Screen
This screen enables you to select a job button to scan using
the conditions registered to the job button, and then send
the image file. (See "Scanning Procedures" on p. 68.)
a Job Button
Opens the Scan / Send Settings screen.
From the Job Button Screen" on p. 69.)
b Jump Keys
Use these keys to find specific Job Buttons when there
are many Job Buttons displayed, for example.
IMPORTANT
• The document is scanned immediately after you press the job
button. Make sure to place your document before you press
the job button. (See "Placing Documents" on p. 46.)
• Register and edit job buttons in the Administrator Settings
screen or the User Settings screen.
• If you are unable to edit a job button, the editing of job buttons
has been restricted by the ScanFront administrator. For
details, contact the administrator.
(See "Scanning
64
Chapter 4 Operating Procedures