Using Patch Code Sheets - Canon ScanFront 400 Instructions Manual

❏ Using patch code sheets
This section describes how to scan while using patch code
sheets for file separation.
1.
Print the patch code sheets using a printer.
The patch code sheets are stored in the following folder on
the supplied instructions and utilities CD-ROM.
Q:\Documents
("Q:" is the drive letter of the CD-ROM drive.)
IMPORTANT
• Print [PATCH T (A4)] and [PATCH II (A4)] on A4 size paper
and [PATCH T (LTR)] and [PATCH II (LTR)] on letter size
paper, always in their original size.
• If a patch code sheet is enlarged or reduced for printing, the
patch code may not be recognized.
2.
Insert the patch code sheets in front of the pages that
will head the separated files, and place the
documents in the feed tray.
Insert the patch code sheets
in front of the pages that will
head the separated files.
3.
Open the [Batch separation] screen from the [Send
Settings] screen.
4.
Set [Batch separation settings] to [Patchcode], and
configure the [Patchcode Orientation] and [Record
the paper separated file] settings.
For details, see see "Batch separation" on p.
5.
Start scanning.
102
Chapter 4 Operating Procedures
100.