Changing The Feed Method; Usb Port - Canon ScanFront 400 Instructions Manual

❏ Changing the Feed Method
Set [Non Separation Feeding Mode] to [ON] or [OFF] in
the Detailed Settings screen according to the feed method
of the document.
OFF
When you want to scan multiple documents while
separating each sheet one at a time, set [Non Separation
Feeding Mode] to [OFF].
ON
When you want to scan continuous documents, such as
receipts, without separating each sheet or scan documents
made of thick paper, set [Non Separation Feeding Mode]
to [ON].
IMPORTANT
When scanning multiple page documents that are fastened
together, such as invoices, place the documents so that the
edge that is fastened together is facing down.
❏ USB Port
You can insert a USB memory device into the USB port to
store image files.
You can also connect a USB keyboard and USB mouse to
operate the ScanFront.
IMPORTANT
• The scanner will not start if you turn the power ON while a USB
memory device is inserted. Insert the USB memory device
after the scanner starts up and the Home screen appears.
44
Chapter 3 Handling
USB Memory