Canon 220P - imageFORMULA ScanFront Operation Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Scanner
  5. 220P - imageFORMULA ScanFront
  6. Operation manual
Canon 220P - imageFORMULA ScanFront Operation Manual

Canon 220P - imageFORMULA ScanFront Operation Manual

Operating guide
Hide thumbs Also See for 220P - imageFORMULA ScanFront:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual , User Manual

Operation Guide

Please read this manual before using the scanner.
After you finish reading this manual, keep it in a safe place
for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Canon 220P - imageFORMULA ScanFront

Summary of Contents for Canon 220P - imageFORMULA ScanFront

  • Page 1: Operation Guide

    Operation Guide Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference.
  • Page 2 • Canon and the Canon logo are registered trademarks of DATA OR PROFITS, WHETHER OR NOT ADVISED OF Canon Inc. in the United States and may also be trademarks THE POSSIBILITY OF DAMAGE, AND ON ANY or registered trademarks in other countries.
  • Page 3 PARTICULAR PURPOSE ARE DISCLAIMED. IN NO Independent JPEG Group. EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, Copyright 2007 by CANON ELECTRONICS INC. All rights INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR reserved. CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT...
  • Page 5 Introduction Thank you for purchasing the Canon imageFORMULA ScanFront 220/220P network scanner. Please read this manual thoroughly before using the scanner to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference.

  • Page 6: Manuals For The Scanner

    ❏ Manuals for the Scanner ❏ Symbols Used in This Manual The following manuals are provided with the Canon The following symbols are used in this manual to explain ScanFront 220/220P. Be sure to read these manuals procedures, restrictions, handling precautions, and thoroughly before using the scanner.

  • Page 7: How This Manual Is Organized

    ❏ How This Manual is Organized This manual consists of the following chapters. Chapter 1 Before Use This chapter provides an overview of the ScanFront. Chapter 2 Handling This chapter describes the types of documents that can be scanned, and the basic operations of the scanner. Chapter 3 Operating Procedures This chapter describes the basic operating procedures for the scanner.

  • Page 8: Table Of Contents

    ❏ Table of Contents Chapter 3 Operating Procedures 1. Flow of Scanner Operations ......3-2 Introduction .............. i 2. Turning the Power ON and OFF ...... 3-3 Manuals for the Scanner .......... ii Turning the Power ON.......... 3-3 Symbols Used in This Manual ........ii Turning the Power OFF ........
  • Page 9 Chapter 4 Web Menu (User Mode) 1. Web Menu Overview ........4-2 2. Logging In to the Web Menu ......4-3 3. User Settings ............4-4 User Settings ............4-5 4. Address Book Settings ........4-6 Registering New Addresses ......... 4-8 Copying Addresses ..........4-10 Exporting and Importing Address Books ....
  • Page 11 Chapter 1 Before Use 1. Important Safety Instructions ......1-2 Installation Location ..........1-2 Power ..............1-2 Moving the Scanner ..........1-3 Handling ..............1-3 About the Fingerprint Sensor (ScanFront 220P only) ..........1-5 Disposal ..............1-5 2. Names and Functions of Parts......1-6 Front and Document Feed and Eject Trays ..1-6 Side and Rear ............1-7...

  • Page 12: Important Safety Instructions

    Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. ❏ Installation Location ● Avoid exposing the scanner to rapid changes in temperature. If the room in which the scanner is The performance of this scanner is affected by the installed is cold but rapidly heated, water droplets environment in which it is installed.

  • Page 13: Moving The Scanner

    When connecting ● If you have any questions regarding the power the power cord, make sure that the power plug is supply, contact your local authorized Canon dealer securely and completely inserted into the power or service representative for further information.
  • Page 14 Then, contact your local authorized Canon dealer ■ Leave sufficient space around the power plug so or service representative to have the unit serviced.

  • Page 15: About The Fingerprint Sensor (Scanfront 220P Only)

    ❏ About the Fingerprint Sensor ❏ Disposal (ScanFront 220P only) ● Prior to disposing of the scanner, initialize the ● The following actions may damage the sensor or scanner to ensure that the registered data is deleted. cause it to malfunction: ●...

  • Page 16: Names And Functions Of Parts

    Names and Functions of Parts The names and functions of the parts of the ScanFront 220/220P are shown below. ❏ Front and Document Feed and Eject Trays a Power Switch ScanFront 220 Use this to turn the power ON. (See p. 3-3.) * Use the Power OFF button on the touch panel to turn the power OFF.

  • Page 17: Side And Rear

    ❏ Side and Rear k Kensington Slot This is an anti-theft slot that enables a key chain or lock to be connected to prevent theft. l PS/2 Connector (Green) Connect a PS/2 mouse. (See p. 2-6.) m PS/2 Connector (Purple) Connect a PS/2 keyboard.

  • Page 19: Chapter 2 Handling

    Chapter 2 Handling 1. Documents............2-2 Plain Paper............2-2 Business Card............2-2 Card ..............2-3 2. Preparing the Scanner ........2-4 Preparing the Document Feed Tray and Eject Tray ..............2-4 Feed Selection Lever ..........2-5 USB Port ...............2-5 Using a PS/2 Keyboard and PS/2 Mouse .....2-6 3.

  • Page 20: Documents

    Documents The ScanFront can scan documents in a range of sizes from business cards and checks to A4. It is possible to feed documents of the following sizes and thicknesses depending on the feeding method used. ❏ Plain Paper • Note that scanning the following types of documents can cause a paper jam or malfunction.

  • Page 21: Card

    ❏ Card Size 53.9 × 85.5 mm (Conforming to ISO Standards) Thickness 0.76 mm and below Insertion orientation Landscape CAUTION A card placed into the document feed tray in the portrait orientation may not be output properly because a load is placed on it during feeding.

  • Page 22: Preparing The Scanner

    Preparing the Scanner When placing a document in the scanner, pull out the document feed tray so that it matches the size of the document, and then move the feed selection lever to the appropriate position for the desired feed method (page separation feeding or bypass feeding) for the document.

  • Page 23: Feed Selection Lever

    ❏ Feed Selection Lever ❏ USB Port Change the position of the lever to the desired feed method You can insert a USB memory device to store image files for the document. or connect a USB keyboard or USB mouse to operate the scanner.

  • Page 24: Using A Ps/2 Keyboard And Ps/2 Mouse

    ❏ Using a PS/2 Keyboard and PS/2 Mouse You can connect a PS/2 keyboard and mouse to the PS/2 port and use them to operate the scanner. Green (Top): Mouse Purple (Bottom): Keyboard IMPORTANT Turn OFF the scanner before connecting or disconnecting the PS/2 mouse and keyboard.

  • Page 25: Placing Documents

    Placing Documents When placing documents into the scanner, place them face down into the tray with the top edge of the document at the bottom of tray. ❏ Placing a Document Place the document face down with its top edge at the bottom of the tray.

  • Page 26: Placing A Card

    Place the card face down in the landscape orientation IMPORTANT with the top edge at the bottom of the tray. Up to 50 sheets of ordinary paper can be loaded into the document feed tray. When placing the document, make sure the size of stack does not exceed the loading marks on the document guides.

  • Page 27: Clearing A Paper Jam Or Double Feed Error

    Clearing a Paper Jam or Double Feed Error When a paper jam or double feed error is detected, feeding and scanning stops. Check the displayed message. If a paper jam or double feed error is detected in the middle If a paper jam or double feed error is detected at the first of a document, the following messages appear.
  • Page 28 Pull out the jammed document in the direction that IMPORTANT seems the easiest to remove it. When the message above is displayed and the scanner transitions to Low Power Mode, all of the data scanned up until that point is discarded. (See p. 3-3.) Remove the scanned documents from the document eject tray, and any documents remaining in the document feed tray.

  • Page 29: Fingerprint Sensor (Scanfront 220P)

    Fingerprint Sensor (ScanFront 220P) The ScanFront 220P is equipped with a fingerprint sensor for registering fingerprints and authenticating users. The fingerprint sensor is a precision component. Be careful when handling this sensor. ❏ Cautions for Handling the Fingerprint ● When cleaning the fingerprint sensor, use a soft dry cloth to wipe dirt off the surface.

  • Page 30: Fingerprint Authentication

    ❏ Fingerprint Authentication ● Authentication performance may improve if the condition of the fingerprint is improved as a result ● Follow the procedure below to use fingerprint of washing your hands or applying hand cream. registration and authentication. ● Authentication may not be performed properly 1.

  • Page 31: Chapter 3 Operating Procedures

    Chapter 3 Operating Procedures 1. Flow of Scanner Operations ......3-2 7. Scanning Procedures ........3-13 2. Turning the Power ON and OFF.......3-3 Scanning From the Home Screen ...... 3-13 Turning the Power ON.......... 3-3 Scanning From the Job Button Screen....3-13 Address Selection Screen ........

  • Page 32: Flow Of Scanner Operations

    Flow of Scanner Operations The procedure and screen transitions for the process from turning the scanner ON, to sending an image file are as follows. For descriptions of the various settings, refer to the appropriate reference pages. Turn the power ON (See p.

  • Page 33: Turning The Power On And Off

    Turning the Power ON and OFF Use the power switch to turn the scanner ON, and press the [Power off] button on the touch panel to turn it OFF. ❏ Turning the Power ON ❏ Turning the Power OFF Press the power switch to turn the scanner ON. The power Press the [Power off] button displayed at the bottom left of indicator lights, and the Home screen or the login screen the panel to turn the scanner OFF.

  • Page 34: Login Screen

    Login Screen The login screen appears at the startup when the scanner is turned ON. ❏ Login Screen Types Hint There are two types of login screen: a list type login screen • Set the type of login screen from [Device Operation] of the for selecting from a list of registered users, and a key in Web menu (refer to p.

  • Page 35: List Type Login

    ❏ List Type Login Enter a password and then press [OK]. Use the procedure below to log in to the list type login screen. Select the user to log in as from the list, and then press [Next]. IMPORTANT Passwords are case-sensitive. Make sure to enter the password correctly.

  • Page 36: Key In Type Login

    ❏ Key in Type Login Press [Login] to log in to the scanner. In the key in type login screen, enter your user name and password to log in. Press [User name] ([Password]). The Home screen (or Job Button screen) appears. The keyboard screen appears.

  • Page 37: Fingerprint Authentication (Only Available With The Scanfront 220P)

    ❏ Fingerprint Authentication (Only The Home screen (or Job Button screen) appears if the fingerprint is authenticated correctly. Available with the ScanFront 220P) Hint Use the procedure below for fingerprint authentication. For details on fingerprint registration, see “Fingerprint If fingerprint authentication fails, try sweeping your finger again. Registration (Only Available with the ScanFront 220P)”...

  • Page 38: Screen Displayed After Login

    Screen Displayed after Login You can set the screen (Home screen or Job Button screen) that is displayed after a user logs in. (See p. 4-4.) ❏ Home Screen ❏ Job Button Screen This screen enables you to select a job button to scan using the conditions registered to the job button, and then send the image file.

  • Page 39: User Settings Screen

    User Settings Screen The User Settings screen enables you to edit the user password and register a fingerprint (only available with the ScanFront 220P). ❏ Fingerprint Registration Fingerprint registration is enabled when you are using the ScanFront 220P. For details on fingerprint registration, see “Fingerprint Registration (Only Available with the ScanFront 220P)”...

  • Page 40: Fingerprint Registration (Only Available With The Scanfront 220P)

    Fingerprint Registration (Only Available with the ScanFront 220P) Fingerprint authentication is a function for registering the fingerprints of users that will log in when the device authentication method is used, and enables users to log in by authenticating their fingerprints. When fingerprint authentication is used, there is no need to select a user in the list type login screen or enter a user name and password in the key in type login screen.

  • Page 41: Registering A Fingerprint

    ❏ Registering a Fingerprint Scan your fingerprint. Repeat scanning until the same fingerprint has been Register a fingerprint from the User Settings screen successfully scanned three times. accessed from the Home screen. IMPORTANT If the Home screen is not displayed, use of the Home screen has been restricted for the user by the ScanFront administrator.
  • Page 42 Perform an authentication test for the registered fingerprint by scanning your fingerprint. Press [Close] to end fingerprint registration. IMPORTANT If you want to change the registered fingerprint, start registration again from the beginning. 3-12...

  • Page 43: Scanning Procedures

    Scanning Procedures You can perform scanning from the Home screen or the Job Button screen. ❏ Scanning From the Home Screen ❏ Scanning From the Job Button Screen Press a destination selection (E-mail, FTP, Shared folder, If you press a job button, the Scan/Delivery Options screen or USB memory) button to open an address selection appears.

  • Page 44: Address Selection Screen

    ❏ Address Selection Screen From the address selection screen, you can select the address to send an image file and register addresses. a Address Book type d Jump Keys Selects the address book type (Shared Address Book or My Address Book). If the address book server setting is enabled, [LDAP Address Book] is added.

  • Page 45: Usb Memory Screen

    ❏ USB Memory Screen The USB Memory screen enables you to specify the folder in the USB memory to save the image file. a Path c [Upward] button Enter the folder path of the USB memory. You can also Enables you to move to a higher level folder when a press [Downward] to select a folder.

  • Page 46: Scanning

    ❏ Scanning Press a displayed address to select it. A checkmark ( ) is added to the icon for the selected This section describes the procedure for scanning. address. Pressing a selected address again clears the If you want to save the image file to USB memory, specify selection.
  • Page 47 Press [Start] to start scanning. Scanning stops after the document has been scanned. Set the scan conditions. (See “Scan/Delivery Options” on p. 3-23.) IMPORTANT IMPORTANT • If [Send the files immediately after scanning] is set to [ON] in When you use a job button for scanning, the subsequent Delivery Options of the Scan/Delivery Options screen, procedure varies as follows in accordance with the job button scanning ends without displaying the continue to scan...
  • Page 48 Check the scanned images. IMPORTANT : Display the image of the next page. If [Confirm addresses before sending] is set to [OFF] in Delivery : Display the image of the previous page. Options of the Scan/Delivery Options screen, the image is sent without displaying the address confirmation screen and the : Move the viewing area around an image operation ends.

  • Page 49: Registering And Editing Addresses

    Registering and Editing Addresses If an address to which you want to send an image file is not registered in the address book or the information of a registered address has not been updated, use the procedure below to register a new address or modify an address in the address book. ❏...
  • Page 50 3. Press [Downward] to move to a level lower than the selected • User name/Password folder, or press [Edit] and [Create a new folder] to create a Enter the user name and password for logging in to the new folder. FTP server.

  • Page 51: Modifying An Address

    • [Add] button Select addresses to register to the group from [Address Book type] and [Address type]. The selected addresses are displayed in the list. Detailed information for the address appears. Check the detailed information for the selected address. Press [Edit], and then press [Modify]. IMPORTANT •...

  • Page 52: Copying An Address

    ❏ Copying an Address You can copy addresses between My Address Book and Shared Address Book. Select the address book entry to copy. Select the address, press [Edit], and then press [Copy]. Press [New] and paste the address. Hint If the address book already has an address with the same name as the pasted one, the following message appears.

  • Page 53: Scan/Delivery Options

    Scan/Delivery Options This section describes the scan settings and send settings for the scanner. a Address Display Area IMPORTANT Displays the selection that you made on the address If you press [Default] in the Scan/Delivery Options screen selection screen or the addresses registered to the job opened from a job button, the settings are reset not to the button.

  • Page 54: Scan Settings

    ❏ Scan Settings Resolution Select the resolution for scanning. The scan settings include basic condition settings (page Scanning Side size, mode, resolution, scanning side, and brightness) and detailed settings for scanning. Select the method for scanning the document (Simplex, Duplex, Skip Blank Page). Basic Condition Settings Hint Paper size...
  • Page 55 Detailed Settings Double feed detection by length The scanner detects by document length when two or more Press the [Detailed settings] button to open the Detailed documents are fed together, and stops feeding when a Settings screen. double feed is detected. IMPORTANT •...
  • Page 56 Document orientation IMPORTANT If you select [Prefer Quality], the scanning speed is reduced. If you are scanning a large number of pages, select [Prefer Speed] to prevent a decrease in scanning speed. Bleed-through reduction Rotates the scanned image a specified amount. Hint If you select [Auto], the orientation of text within the document is detected and the image is rotated so that the orientation of the...

  • Page 57: File Formats

    ❏ File Formats Back side Brightness/contrast You can select from the three available file formats TIFF, JPEG, and PDF, and the modes available for scanning vary, depending on the file format setting. (See “Mode” on p. 3-24.) TIFF format This is enabled when you scan both sides of a document and should be used when the document has front and back sides of different density.

  • Page 58: Security Settings For Pdf Files

    ❏ Security Settings for PDF Files PDF format Security is implemented for PDF files with the encryption and password settings in the security settings. Configure the following settings for saving in PDF format. • Compression Select the compression method. Encryption Level •...

  • Page 59: Delivery Options

    ❏ Delivery Options Use permissions password to restrict editing security settings The following settings are restricted by the permissions password. • Printing allowed This permits printing of the PDF file with a printer. • Changes allowed This permits editing of the PDF file; for example, adding and deleting pages.
  • Page 60 Action when the same named file exists Screen after sending Set the action to perform when there is already a file of the Select the screen to display after sending images. same name at the destination. • Home screen (Job Button screen) •...

  • Page 61: Chapter 4 Web Menu (User Mode)

    Chapter 4 Web Menu (User Mode) 1. Web Menu Overview........4-2 2. Logging In to the Web Menu......4-3 3. User Settings ........... 4-4 User Settings............4-5 4. Address Book Settings........4-6 Registering New Addresses........4-8 Copying Addresses ..........4-10 Exporting and Importing Address Books.....4-11 5.

  • Page 62: Web Menu Overview

    Web Menu Overview The Web Menu function enables you to access and configure the scanner from the Web browser of a remote computer. From the Web Menu, you can register address books and job buttons. Computer (Web Menu) Settings Network ScanFront220 IMPORTANT •...

  • Page 63: Logging In To The Web Menu

    Logging In to the Web Menu You can log in to the Web Menu using the following procedure. Hint Use the device name or the IP address assigned to the scanner as the URL for accessing the Web Menu. Contact the ScanFront administrator for the device name and the IP address.

  • Page 64: User Settings

    User Settings From the User Settings screen, you can change the information of a user logged in by Device Authentication. a Setting (See “User Settings” on p. 4-4) Allows you to edit a user’s settings. IMPORTANT • For a user logged in by Server Authentication, you can only select a setting for [Screen after Login]. •...
  • Page 65 ❏ User Settings Screen after Login Select the Home screen or the Job Button screen as the first Click [Setting] to edit the user information. screen to appear after the user logs in. • Home Screen User name Enter a new user name. •...

  • Page 66: Address Book Settings

    Address Book Settings From the Address Book Settings screen, you can register entries in the Shared Address Book, which is available to all users, and the My Address Book, which is provided for each user. a Type of Address Book f [Select All] button Selects the address book (Shared Address Book or My Selects all of the displayed addresses.
  • Page 67 IMPORTANT If the ScanFront administrator has restricted editing of the address books, the following Address Book settings apply. For details, consult the ScanFront administrator. • If editing is restricted for only one address book (either the My Address Book or the Shared Address Book), users can only copy addresses from the restricted address book and paste them into the unrestricted address book.

  • Page 68: Registering New Addresses

    ❏ Registering New Addresses Address type: FTP Server This option registers a network FTP server. Select the type of address book (Shared Address Book or My Address Book), and click [New Address] to register a IMPORTANT new address. FTP servers that require firewall settings cannot be registered. Hint •...
  • Page 69 Save Password Hint Saves the entered password. You can display the shared folders using the following Passive Mode procedure. 1. After entering the computer name, user name, password, Uses passive mode to send transmissions to the FTP and domain/workgroup, click [Browse]. Access the computer server.

  • Page 70: Copying Addresses

    ❏ Copying Addresses IMPORTANT You can copy an address and register it as a new address. If you do not save the password, password entry will be required You can also copy an address from one address book to each time you send. another.

  • Page 71: Exporting And Importing Address Books

    Confirm the copied address. Importing to the Scanner You can import previously exported address book data to the scanner. Click [Import to ScanFront 220]. ❏ Exporting and Importing Address Books You can back up your address books as files in CSV format, and import the backed up address book data to another ScanFront unit.

  • Page 72: Job Button Settings

    Job Button Settings From the Job Button Settings screen, you can register the Shared Job Button, which is available to all users, and the My Job Button, which is provided for each user. a Job Button Type f [Except All] button Select the job button (Shared Job Button or My Job Deselects all of the displayed job buttons.
  • Page 73 IMPORTANT If the ScanFront administrator has restricted editing of the job buttons, the following Job Button settings apply. For details, consult the ScanFront administrator. • If editing is restricted for only one set of job buttons (either the My Job Button or the Shared Job Button), users can copy job buttons from the restricted set of job buttons and paste them into the unrestricted set.

  • Page 74: Registering New Job Buttons

    ❏ Registering New Job Buttons Address Click [New Job Button] to register a new job button. Job Button Settings Click [Add from Address Book], open the Address page, and select the address to send to. IMPORTANT • You can register up to 100 addresses to a job button. Name of Job Button •...

  • Page 75: Scan Settings Overview

    E-mail settings Confirm addresses before sending • ON Displays the Address Confirmation screen, and then starts sending after you confirm the address. • OFF Sends the image without confirming the address. Subject Enter a subject for the e-mail message. Screen after sending Select the screen to display after an image is sent.
  • Page 76 Mode Prescan Select the scanning mode (Black and White, Error Enables you to preview an image of the first page of the Diffusion, Text enhance, Gray, Color). document before scanning the entire document. IMPORTANT Hint Depending on the selected mode, the file formats available for •...
  • Page 77 JPEG: Compression Encryption (Security) Use encryption to add security to the PDF file. IMPORTANT Using the High (128-bit RC4) encryption level is recommended. The Low (40-bit RC4) encryption level provides less security. Protect Document Select a compression ratio for images saved in JPEG The ability to view the document is protected by a format.
  • Page 78 Detailed settings Double feed detection by length The scanner detects by document length when two or more documents are fed together, and stops feeding when a double feed is detected. IMPORTANT • Using the length of the first document page as a reference, the scanner detects a double feed when a subsequent page is longer or shorter than the reference page by 35 mm or more.

  • Page 79: Copying Job Buttons

    Color drop-out Select My Job Button for the copy destination, and click [OK]. The color drop-out function has a “drop-out” effect that leaves out a specified color (red, blue, or green) while scanning, and a “color enhancement” effect that emphasizes a specified color. IMPORTANT The color drop-out setting is disabled when the scanning mode is set to [Color].
  • Page 80 Exporting from the Scanner Click [Execute]. Confirm the message that appears, and click [OK] to You can save the job button settings file to a specified import the data. folder. Click [Export from ScanFront 220]. Hint When importing is completed, the following message appears. Click [OK] to return to Job Button Settings and confirm the imported job button.

  • Page 81: Chapter 5 Troubleshooting

    Chapter 5 Troubleshooting 1. Troubleshooting ..........5-2...

  • Page 82: Troubleshooting

    Refer to the ScanFront 220/220P INSTRUCTIONS (electronic manual) Streaks appear in images Solution and clean the scanning glass. If there are scratches on a scanning glass, contact your local authorized Canon dealer. Cause The rollers are dirty. Paper becomes jammed...
  • Page 83 Check the connections of the AC adapter and power plug. If the Solution problem is not resolved after checking the connections, contact your local authorized Canon dealer. (1) The date and time settings are incorrect. (2) The time zone is set to a The wrong send time is Cause different country.
  • Page 84 Cause The device name that was set is already being used by another device. Cannot connect to the network Contact the system administrator of the network, and change the device (device name conflict problem) Solution name setting. When you install two or more ScanFront scanners, take care to ensure duplicate device names are not set.
  • Page 85 Chapter 6 Index...
  • Page 86 Home Screen ..............3-8 AC Adapter ..............1-7 Address Installation Location ............1-2 Copying ............3-22, 4-10 Introduction ...............i Modifying ............. 3-21 New ..............3-19, 4-8 Job Button Screen ............3-8 Address Book Settings ..........4-6 Job Button Settings ..........4-12, 4-14 Address Selection Screen ..........3-14 Address Settings ............4-14 Address Type Delivery Options ...........4-15...
  • Page 87 Safety Instructions ............1-2 Scan Settings ............3-24, 4-15 Basic Condition Settings ........3-24 Detailed Settings ..........3-25 Scan/Delivery Options ..........3-23 Scanning ..............3-16 Security Settings ............3-28 Server Authentication ..........3-4, 4-3 Troubleshooting ............5-2 Turning Off the Power ..........3-3 Turning On the Power ..........
  • Page 88 CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC.

This manual is also suitable for:

Scanfront 220Imageformula scanfront 220

Table of Contents