Address Book Server - Canon ScanFront 400 Instructions Manual

IMPORTANT
For details on the strings to enter for the search base, contact
your system administrator.
• Host Name(Address)
Enter the host name or IP address of the authentication
server.
Hint
Press [Connection test] to check the connection for the
entered host name.
• Domain
Enter a domain name supported by Active Directory.
• Port number
Enter the port number used for the LDAP protocol. The
standard port number is 389.
Hint
The standard port number will be 636 when [Use SSL] is
enabled.
• User name
When using the authentication server as an address book
server, enter a user name for referring to e-mail
addresses.
• Register / Change password
When you want to set a password for the above user,
select the check box and then enter a password.
Hint
Changing the password updates the password information
saved on the ScanFront, but does not alter the password
registered on the server.
When server authentication is set, a list box for selecting
device authentication or server authentication is added to
the login screen.
❏ Address Book Server
When using an address book server (LDAP server), select
the server and enter all of the settings if the authentication
server and address book server are different.
For details on the settings,
p. 140.
Hint
When using an address book server that is different from the
authentication server, select [Anonymous] for [Authentication
Method].
141
Chapter 5 Administrator Settings
see "Authentication Server" on