Sntp; Ssdp - Ricoh PRO C900S Network Manual

Hide thumbs Also See for PRO C900S:

Table of Contents

1. Monitoring and Configuring the Machine

• If you select "on", plain-text communication becomes impossible - only encrypted

communication is possible.

• "Encrypted communication" means an encrypted password is set on the machine.

sntp

The machine clock can be synchronized with a NTP server clock using Simple Network Time Protocol

(SNTP). Use the "sntp" command to change SNTP settings.

View settings

msh> sntp

NTP IPv4 server address configuration

You can specify the IPv4 address of the NTP server.

msh> sntp server "IPv4_address"

Deleting NTP server configuration

msh> sntp server clear

Interval configuration

msh> sntp interval "polling_time"

• You can specify the interval at which the machine synchronizes with the operator-specified NTP

server. The default is 60 minutes.

• The interval can be entered from 0, or between 15 and 10,080 minutes.

• If you set 0, the machine synchronizes with the NTP server only when you turn the machine on.

After that, the machine does not synchronize with the NTP server.

Time-zone configuration

msh> sntp timezone "±hour_time"

• You can specify the time difference between the machine clock and NTP server clock. The values

are between -12:00 and +13:00.

• You can only select either the address or host name for the ntp server.

Use the "ssdp" command to view and configure SSDP settings.

View settings

msh> ssdp

Table of Contents