Dhcp - Ricoh PRO C900S Network Manual

1. Monitoring and Configuring the Machine
Machine name configuration
msh> devicename name "string"
• Enter a machine name using up to 31 alphanumeric characters.
1
• Set single names for each machine.
Machine name initialization
msh> devicename clear name
• Reset the machine name to its default.

dhcp

Use the "dhcp" command to configure DHCP settings.
View settings
The following command displays the current DHCP settings.
msh> dhcp
Configuration
You can configure DHCP.
msh> dhcp "interface_name" {on|off}
• Click {on} to enable dhcp. Click {off} to disable DHCP.
• If the DNS server address and domain name are obtained from DHCP, be sure to click {on}.
ether
Current interface priority configuration display
msh> dhcp priority
Interface priority configuration
msh> dhcp priority "interface_name"
• You can select which interface has DHCP parameter priority.
• Priority settings are available when multiple interfaces are installed.
DNS server address selection
msh> dhcp dnsaddr {dhcp|static}
• Specify whether to obtain the DNS server address from the DHCP server or use the address set
by a user.
• To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set
by a user, specify "static".
30
Interface name Interface configured
Ethernet interface