Ricoh PRO C900S Network Manual page 43

Hide thumbs Also See for PRO C900S:

Table of Contents

Configuration

• Enter "up" to enable protocol, and enter "down" to disable protocol.

You can set the protocol to "active" or "inactive".

msh> set ipv4 {up|down}

• If you disable IPv4, you cannot use remote access after logging off. If you did this by mistake,

you can use the control panel to enable remote access via IPv4.

• Disabling IPv4 also disables ftp, rsh, web, snmp, ssl, http, and sftp.

msh> set ipv6 {up|down}

• If you disable IPv6, you cannot use remote access after logging off. If you did this by mistake,

you can use the control panel to enable remote access via IPv6.

• Disabling IPv6 also disables ftp6, rsh6, ssl6, http6, and sftp6.

msh> set ipsec {up|down}

msh> set smb {up|down}

msh> set ftp {up|down}

msh> set ftp6 {up|down}

msh> set rsh {up|down}

msh> set rsh6 {up|down}

msh> set web {up|down}

msh> set snmp {up|down}

msh> set ssl {up|down}

msh> set ssl6 {up|down}

• If Secured Sockets Layer (SSL, an encryption protocol) function is not available for the machine,

you cannot use the function by enabling it.

msh> set nrs {up|down}

msh> set rfu {up|down}

msh> set rfu6 {up|down}

msh> set http {up|down}

msh> set http6 {up|down}

msh> set ssh {up|down}

msh> set ssdp {up|down}

msh> set nbt {up|down}

msh> set sftp {up|down}

msh> set sftp6 {up|down}

Remote Maintenance by telnet

Table of Contents