Dhcp6; Dns - Ricoh PRO C900S Network Manual

Domain name selection
msh> dhcp domainname {dhcp|static}
• Specify whether to obtain the domain name from the DHCP server or use the domain name set
by a user.
• To obtain the domain name from the DHCP server, specify "dhcp". To use the domain name set
by a user, specify "static".
• p.63 "Using DHCP"

dhcp6

Use the "dhcp6" command to display or configure DHCPv6 settings.
View settings
The following command displays the current DHCPv6 settings.
msh> dhcp6
DHCPv6-lite configuration and display
msh> dhcp6 "interface_name" lite {on|off}
Viewing and specifying DNS server address selection (obtained from the DHCPv6 server/user
specified value)
msh> dhcp6 dnsaddr {dhcp|static}
DUID(DHCP unique ID) deletion and display
msh> dhcp6 duid clear
Viewing and specifying the time required to re-obtain the parameter obtained from DHCPv6
msh> dhcp6 option lifetime [0-65535]
• It can be entered between 0 and 65535 minutes.
• The default is 60 minutes.
• If you specify "0", you cannot re-obtain the value.

dns

Use the "dns" command to configure or display DNS (Domain Name System) settings.
View settings
The following command displays current DNS settings:
msh> dns
Remote Maintenance by telnet
1
31