Test Pattern Printing - Ricoh MP 305 Plus Field Service Manual

Test Pattern Printing

Printing Test pattern: SP2-109
Some of these test patterns are used for copy image adjustments but most are used primarily for design
testing.
• Do not operate the machine until the test pattern is printed out completely. Otherwise, SC will
occur.
1. Enter the SP mode.
2. Press SP2-109-001.
3. Select test pattern for print from the list, and then press [OK].
4. To change the density of the test pattern, select the density with SP2-109-002, then press
[#].
• If the value of SP2-109-002 is selected to 0, the color adjusted so will not show up in the test
pattern.
5. To print, press [Copy Window], and then set settings within the following window for test
print (paper size etc...).
6. Press [Start] to start test print.
7. After checking test pattern, press [SP Mode] on the screen to return to SP mode display.
8. Reset all settings to the default values with SP2-109-003 and SP2-109-006.
9. Exit SP mode.
No.
0 None
1 1dot Vertical Line
2 2dot Vertical Line
3 1dot Horizontal Line
4 2dot Horizontal Line
5 Grid Vert (Grid Vert ical Line)
6 Grid Horizontal (Grid Horizontal Line)
7 Grid Pattern Small
Pattern No. Pattern
13 4dot Ind. Pttrn (4dot Independent Pattern)
14 Trimming Area
15 Hounds tooth H
16 Hounds tooth V
17 Black Band H (Horizontal)
18 Black Band V (Vertical)
19 Checker Flag Pattern
20 Grayscale V (Vertical)
Test Pattern Printing
323