Table of Contents
Advertisement
4. Insert the SD card straight in slot 2 [B].
• Check whether the card is properly in the SD card slot. When a SD card is inserted, a click is
heard, and it is locked.
• To remove the card, release by pressing once in the set state.
5. Turn ON the main power.
6. Wait until the update screen starts (about 45 seconds).
When it appears, "Please Wait" is displayed.
7. Check whether a program installation screen is displayed. (English display) When two or more
software modules are contained in the SD card, they are displayed as follows.
Firmware Update
327
Advertisement
Chapters
Table of Contents
