Shutdown Method (How To Turn Off The Main Power) - Ricoh MP 305 Plus Field Service Manual

4. Replacement and Adjustment
• Automatic restart deals with cases when you accidentally unplugged the AC power cord or
unexpected power outages. By keeping the power flag ON, after the resumption of power,
the machine will start up automatically.
In rare cases, when you reconnect the AC power cord to a power outlet, the machine does not
start automatically. In this case, the machine has not failed. The cause is due to the timing of
releasing the residual charge. If you press the main power switch while the residual charge was
already released, the power ON flag will not be set. At this time, start the machine manually by
pressing the main power switch.

Shutdown Method (How to Turn OFF the Main Power)

1. Press the main power switch [A] on the machine.
• When the shutdown is complete, the LED on the operation panel is turned OFF.
2. Disconnect the power cord.
• Wait three minutes to access the internal parts such as the controller board.
• If some LEDs on any of the boards are blinking or lit, current is still flowing.
• After the shutdown process, the main power is turned OFF automatically.
• How to start from shutdown:
142