Avaya H.323 9608 Installation And Management Manual page 33

11. While the upgrade script file is being downloaded, all IP phones display the following
12. When the phone establishes the validity of the application file received, the phone
13. While the application file is saved in flash memory, all IP phones display the
14. The phone contacts the Avaya Media Server and displays a login screen that
Steps to be performed by user after phone displays login and extension prompts:
1. Enter a new extension and press OK. To register the phone without the extension
Installing and maintaining Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and 9641GJanuary 2014
Note:
The SIG parameter value determines the signaling protocol whether H.323 or
SIP, and is used to determine the proper upgrade file that is downloaded. If you
set the SIG parameter manually using the local administrative Craft SIG
procedure, that value takes precedence over a SIG setting in a configuration file.
A change in the SIG value might require a reset to the phone so that a new or
different upgrade file can be downloaded to the phone.
message:
HTTP: n sc etag
where n is the number of the IP address obtained from the HTTP server, sc is the
status code of the HTTP response, and etag is the value of the ETag header.
displays the following message:
where s is the number of seconds that elapse while non-volatile memory is
erased.
following message:
Saving to flash 1% 1 secs
where the percentage of the file and the number of elapsed seconds increase as
the application file is stored in flash memory.
displays the following:
,
Login Enter Extension
or password (unnamed), press only OK or make no entry and wait 60 seconds.
Note:
Unnamed registration is registering a phone with the call server without entry of
an extension or password. You must set the UNNAMEDSTAT parameter to
enable unnamed registration. phones that are registered unnamed have limited
functionality. For more information, see
page 34.
All IP phones display the following:
Login
Enter Password
Understanding the plug in and reset process
File Obtained; please wait...... s secs
, or
Enter Extension and press Enter or OK
About unnamed registration
.
on
33