Using local Administrative Menu procedures
Caution:
This procedure erases all administered data without any possibility of recovering the data.
Neither the boot code nor the application code is affected by this procedure.
Note:
When updating Craft procedures from a touch screen phone, touching the line you want to
change or the applicable softkey produces the same result as selecting a line and pressing
the applicable softkey on a non-touch screen IP phone.
Use the following procedure to clear the phone of the administrative, user-assigned, and
options values.
Procedure
1. Tap Select CLEAR from the Craft Procedures screen. The phone displays the
2. Tap Press Clear to clear all values to use initial default values.
52
Installing and maintaining Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and 9641GJanuary 2014
Press Clear again to confirm.
Tap Press Cancel. If you do not want to clear all values and to terminate the
procedure and retain the current values.
The phone displays the following text:
Clearing values...
The phone is reset to the default factory settings.
• All system values and system initialization values.
• 802.1X identity and password.
• User options, parameter settings, identifiers, and password.
• Any user data like Contact Lists or Call Logs are deleted.
After clearing the values, the phone resets.
Comments? infodev@avaya.com
message.