Avaya H.323 9608 Installation And Management Manual page 64

Using local Administrative Menu procedures
Note:
When updating localCraft Procedures from a touch screen deskphone, touching the line you
want to change or the applicable softkey produces the same result as selecting a line and
pressing the applicable softkey on a non-touch screen IP deskphone.
Use the following procedure to perform self-testing:
Procedure
1. Tap or select TEST from the Craft Procedures screen. The phone displays the
2. Tap or press Test to start phone testing.
3. Press or tap Back to return to the Craft Procedures screen.
64 Installing and maintaining Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and 9641GJanuary 2014
following text:
Press Test to confirm.
Tap or press Cancel to return to the Craft Procedures screen without testing the
phone.
The test performs the following actions:
• Removes labels on all softkeys .
• Illuminates groups of LEDs at a time on the phone and any attached button
modules sequentially for about a half second. Illumination starts with the upper
half of the phone and continues through the lower half of any attached button
module in a repeating cycle.
• Shows pixels on the display with highest intensity.
After approximately 5 seconds, the top phone screen displays either Self-test
passed or Self-test failed.
Comments? infodev@avaya.com