Avaya 3725 User Manual page 64

1. Select In charger.
2. Select Other actions.
3. Select Switch off.
Change Profile
You can configure the cordless telephone to change the profile when placed in the charger. When it is
removed from the charger it will switch back to the previous profile.
1. Select In charger.
2. Select Other actions.
3. Select Change Profile.
Message Absence
You can configure the handset such that when an application/system sends a message to a handset, it
will receive an indication that the handset is absent. If a handset is absent, the application/system
determines if the message shall be sent to the handset or not, or redirected to another handset when
placed in the charger.
1. Select In charger.
2. Select Other actions.
3. Select Message Absence.
Sound off while charging
When the cordless telephone is placed in the charger, the tones can be switched off while it is charging.
When it is removed from the charger, the sound is switched on again.
1. Select In charger.
2. Select Other actions.
3. Select Sound off.
Note:
If the parameter Disable permanent mute is enabled, the telephone will not be muted
Note:
when placed in charger. See Installation and Administration Manual, IP DECT R4.
Deactivating the charging mode
1. Select In charger.
2. Select Other actions.
3. Select No action.
4. Press Select to save the setting.
64
Avaya 3725 DECT Telephone - User Guide 02/2016