Charging The Telephone In Desktop Charger; Rackmount Charger; Multiple Battery Charger; Icons And Text In The Display - Avaya 3725 User Manual

Charging the telephone in desktop charger

When the charger is connected to external power supply, normal operation is carried out as follows:
Telephone charging
1. Place a cordless telephone in the charging slot to start charging.
Telephone disconnection
1. Tilt the telephone forwards you.
2. Then, lift the telephone upwards.
Note:
Do not try to lift the telephone upwards before tilting it forwards.
Note:

Rackmount Charger

The Rackmount Charger is used for charging several telephones, to synchronize parameters, and for
software download.
The built in power supply can charge up to six cordless telephones. See Installation and Administration
Manual, IP DECT R4.

Multiple Battery Charger

The Battery pack charger is used for charging up to six spare batteries.

Icons and text in the display

All functions and settings available to the user are shown as icons and text in the display. The icons and
text in the display indicate functions and settings to which you have access. The display normally
displays date and time, the Owner ID and telephone number. The Owner ID can manually be set by the
user.
Figure 3: Example of a display configuration in idle mode
1
12:00
2
01/01/2010
System A
3
4
123456
5
Menu
24
Avaya 3725 DECT Telephone - User Guide 02/2016