Avaya 3725 User Manual page 105

4, 5 When the text "Please insert old phone in charger" is displayed, replace the new
handset with the old handset. The handset can either be switched on or off.
The handsets will be restarted and after a few seconds, the text "Saving
settings. Do not remove phone from charger" appears. The charger LED
changes to slow orange flashing.
IMPORTANT: Do not remove the handset while the text "Saving settings. Do not remove phone from
6, 7 When the text "Please insert new phone in charger" is displayed, replace the old handset
with the new handset. The text "Restoring settings" is displayed.
IMPORTANT: Do not remove the handset while the text "Restoring settings" is displayed
8 When the text "Phone successfully replaced. Please remove phone to restart." appears
in the display, remove the handset from the charger. The handset is automatically
restarted.
Avaya 3725 DECT Telephone - User Guide
Note: If the CR3 Rack Charger is used, the left charging slot has to be
used for both handsets.
IMPORTANT: If the old handset cannot communicate with the charger,
put the new handset in the charger to restore its settings
(that is, the handset's IPDI). If this step is not performed,
the new handset must be sent for service. The old
handset's settings might be transferred to the new handset
by using WinPDM. See the handset Configuration
Manual.
charger" is displayed. It may take several minutes
Maintenance
105
02/2016