Control Visibility Of Cartographic Objects - Furuno TZT9 Operator's Manual

2. CHART PLOTTER
[Text (Other)]: Show or hide the other text information.
[Display Buoy Names]: Show or hide the buoy names.
[Display Light Description]: Show or hide the light descriptions.
[Display Light Sectors]: Show or hide light sectors for fixed beacons.
[Display Routes]: Show or hide routes.
[Display Routes Bearings]: Show or hide route bearings.
[Display Soundings]: Show or hide depth soundings.
[Display Soundings in Red]: Spot soundings whose depths are lower than the value
selected on the [Shallower than...] menu are shown in red.
[Shallower than ...]: Select the value for the [Display Soundings in Red] menu (setting
range: 0.0, 3.3, 6.6, 9.8, 13.1, 16.4, 19.7, 23.0, 26.2, 29.5, 32.8, 49.2, 65.6, 98.4 ft).
[Display Obstructions Depth Below Safety]: Show or hide obstruction depths under the
safety depths.
[Display Seabed]: Show or hide seabed composition indication, for example, mud,
sand, rock.
[Cautionary Areas]: Show or hide the cautionary areas that appear on the chart.
[Reset Default Settings]: Select this menu item to restore default settings for the [Vec-
tor Chart] menu.
2.9.2

Control visibility of cartographic objects

The [S-52 Display] menu controls the visibility of cartographic objects, for example,
lights, fog signals, etc.
2-8