Furuno TZT9 Operator's Manual page 20

How to remove an SD card
1) Pull the tab on the card drive cover to open the card drive.
2) Push the card to release the card from the card drive.
3) Remove the card with your fingers then close the cover.
About the SD cards
• Use SD cards carefully. Wrong use can damage the card and destroy its contents.
• Make sure the cover is closed at all times.
• Remove a card with only your fingers. Do not use metal instruments (like tweezers)
to remove the card.
• Do not remove a card during the reading of the card or writing to the card.
• If there is water at the bottom of the card cover, DO NOT open the cover. Remove
the water with a dry cloth completely and then open the cover.
• The memory cards in the tables below have been tested:
Type
RP-SDW32G
SD-E032GUX
SD-E064GUA
SD6A/64GB
LSD64GCBJP133
Type
SDSDB-2048-J60
SDSDH-2048-903
SDSDBR-4096-J85
SDSDRH-4096-903
SDSDRH-8192-903
SDSDRX-4096-903
RP-SDR02GJ1A
RP-SDK02GJ1A
RP-SDM04GK1K
RP-SDM08GK1K
RP-SDM16GK1K
RP-SDV04GK1K
RP-SDV08GK1K
SDXC card
Capacity
32 GB
32 GB
64 GB
64 GB
64 GB
SD card (2 GB or above)
Capacity
2 GB
2 GB
4 GB
4 GB
8 GB
4 GB
2 GB
2 GB
4 GB
8 GB
16 GB
4 GB
8 GB
1. SYSTEM INTRODUCTION
Maker
Panasonic
TOSHIBA
TOSHIBA
Kingston
Lexer
Maker
SANDISK
SANDISK
SANDISK
SANDISK
SANDISK
SANDISK
Panasonic
Panasonic
Panasonic
Panasonic
Panasonic
Panasonic
Panasonic
1-7