Maintenance, Troubleshooting; Maintenance - Furuno TZT9 Operator's Manual

14. MAINTENANCE, TROUBLE-
SHOOTING
This chapter has information about maintenance and troubleshooting that the user
can follow to care for the equipment.
14.1

Maintenance

Routine maintenance helps keep your equipment in good condition and prevents fu-
ture problems. Check the items shown in the table below to help keep your equipment
in good condition for years to come.
Check item
Cables
Cabinet
LCD
Check point
Check that all cables are
fastened. Check the cables
for corrosion.
Dust on the cabinet
Dust on the LCD
Waterdrops on the LCD
Remedy
Connect the cables that have loosened.
Replace any damaged cables.
Remove dust with a dry clean cloth. Do
not use commercial cleaners to clean
the equipment. Those cleaners can re-
move paint and markings.
Wipe the LCD carefully to prevent
scratching, using tissue paper and an
LCD cleaner. To remove dirt or salt de-
posits, use an LCD cleaner, wiping
slowly with tissue paper so as to dis-
solve the dirt or salt. Change paper fre-
quently so the salt or dirt will not scratch
the LCD. Do not use solvents such as
thinner, acetone or benzene for clean-
ing. Also, do not use degreaser or anti-
fog solution, as they can strip the
coating from the LCD.
Wipe the LCD with a dry cloth to remove
the water. Waterdrops on the LCD can
cause slow touch response.
14-1