How To Follow A Route Selected From The Routes List - Furuno TZT9 Operator's Manual

2. Select [Activate].
Arrow marks in direction to follow route
Boat icon
(current position)
The following occurs:
• The line for the selected route turns red.
• The go to point (1st route point) is highlighted.
• A thick red dashed line and a yellow line run between the current position and the
1st route point of the selected route. The thick red dashed line is the course to follow
to get to the 1st route point. The yellow line is the shortest course from the current
position to the go to point.
• The go to point is numbered "1" and the position where the [Go To] function starts
is numbered "0".
• The arrival area marker appears if activated on the menu (see paragraph 5.9.5).
• The XTE lines, red for port side, green for starboard side, appear. You can show or
hide these lines with [Display XTE Lines] on [Routes] of the main menu.
Note: If you want to be notified when you reach a go to point, turn on [Waypoint Cross-
ing Notification] on [Routes] of the main menu (see paragraph 5.9.8). Then the mes-
sage "Waypoint Crossing" appears when you reach a go to point. For the arrival
timing, see paragraph 5.9.5.
5.8.2

How to follow a route selected from the routes list

1. Select [Lists] on the menu icon bar to open the lists menu.
2. Select [Routes List] to open the routes list.
3. Select the route to follow then select [Goto] from the options.
4. Select [Close] to exit the menu.
The following occurs:
• The line for the selected route turns red.
• The go to point (1st route point) is highlighted.
• A thick red dashed line and a yellow line run between the current position and the
1st route point of the selected route. The thick red dashed line is the course to follow
1 1
0 0
Course to 1st route point
(thick red dashed line)
Route leg (red line)
2
4
3
Arrival area (appears when
you select [Circle and
Cross Line] or [Circle] in
the [Routes] - [Waypoint
Switching Mode] menu.)
5. ROUTES
5-9