Configuring Terminal Settings and Sessions
Default Settings for File System Parameters
This table lists the default settings for the file system parameters.
Table 16: Default File System Settings
Parameters
Default filesystem
Configuring the Console Port
You can set the following characteristics for the console port:
• Data bits
• Inactive session timeout
• Parity
• Speed
• Stop bits
Before You Begin
Log in to the console port.
Procedure
Step 1
Step 2
Step 3
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
line console
Example:
switch# line console
switch(config-console)#
databits bits
Example:
switch(config-console)# databits 7
Cisco Nexus 9000 Series NX-OS Fundamentals Configuration Guide, Release 7.x
Default Settings for File System Parameters
Default
bootflash:
Purpose
Enters global configuration mode.
Enters console configuration mode.
Configures the number of data bits per byte.
The range is from 5 to 8. The default is 8.
81