Licensing Requirements For File Systems, Directories, And Files; Default Settings For File System Parameters; Configuring The Ftp, Http, Or Tftp Source Interface - Cisco Nexus 9000 Series Configuration Manual

Using the Device File Systems, Directories, and Files

Licensing Requirements for File Systems, Directories, and Files

The following table shows the licensing requirements for this feature:
Product
Cisco NX-OS

Default Settings for File System Parameters

This table lists the default settings for the file system parameters.
Table 19: Default File System Settings
Parameters
Default filesystem

Configuring the FTP, HTTP, or TFTP Source Interface

You can configure the source interface for the File Transfer Protocol (FTP), Hypertext Transfer Protocol
(HTTP), or Trivial File Transfer Protocol (TFTP). This configuration allows you to use the IP address associated
with the configured source interface when copy packets are transferred.
Procedure
Step 1
Step 2
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
[no] ip {ftp | http | tftp} source-interface {ethernet
slot/port | loopback number}
Example:
switch(config)# ip tftp source-interface
ethernet 2/1
Cisco Nexus 9000 Series NX-OS Fundamentals Configuration Guide, Release 7.x
Licensing Requirements for File Systems, Directories, and Files
License Requirement
Using the file systems, directories, and files requires
no license. Any feature not included in a license
package is bundled with the nx-os image and is
provided at no extra charge to you. For a complete
explanation of the Cisco NX-OS licensing scheme,
see the Cisco NX-OS Licensing Guide.
Default
bootflash:
Purpose
Enters global configuration mode.
Configures the source interface for all
FTP, HTTP, or TFTP packets.
99