Understanding the Command-Line Interface
switch(config-email)# reply-to admin@Mycompany.com
switch(config-email)# exit
switch(config)# exit
switch# show email
SMTP host: 198.51.100.1
SMTP port: 25
Reply to: admin@Mycompany.com
From: admin@Mycompany.com
VRF: management
switch# show interface brief | email subject show-interface admin@Mycompany.com
Email sent
The email sent to admin@Mycompany.com with the subject "show-interface" shows the output of the command:
<snip>
---------------------------------------------------------------------
Ethernet
Interface
---------------------------------------------------------------------
Eth1/1
Eth1/2
Eth1/3
Eth1/4
Eth1/5
Eth1/6
Eth1/7
Eth1/8
Eth1/9
Eth1/10
<snip>
Additional References for the CLI
This section includes additional information related to the CLI.
Related Documents for the CLI
Related Topic
Cisco NX-OS Licensing
VLAN Type Mode
Status Reason
--
eth
trunk
up
--
eth
routed down
--
eth
routed up
--
eth
routed down
--
eth
routed down
--
eth
routed down
--
eth
routed down
--
eth
routed down
--
eth
routed down
--
eth
routed down
Cisco Nexus 9000 Series NX-OS Fundamentals Configuration Guide, Release 7.x
Speed
none
10G (D)
Link not connected
auto(D)
none
10G (D)
Link not connected
auto (D)
Link not connected
auto (D)
Link not connected
auto (D)
Link not connected
auto (D)
Link not connected
auto (D)
Link not connected
auto (D)
Link not connected
auto (D)
Document Title
Cisco NX-OS Licensing Guide
Additional References for the CLI
Port
Ch #
--
--
--
--
--
--
--
--
--
--
77