Setting To Output System Information To The Log Buffer; Setting To Output System Information To The Snmp Nms - 3Com 4200G 12-Port Configuration Manual

To do...
Enable system information
output to the trap buffer
Configure the output rules of
system information
Set the format of time stamp in
the output information

Setting to Output System Information to the Log Buffer

Follow these steps to set to output system information to the log buffer:
To do...
Enter system view
Enable the information center
Enable information output to
the log buffer
Configure the output rules of
system information
Set the format of time stamp in
the output information

Setting to Output System Information to the SNMP NMS

Follow these steps to set to output system information to the SNMP NMS:
To do...
Enter system view
Use the command...
info-center trapbuffer
[channel { channel-number |
channel-name } | size
buffersize]*
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
info-center timestamp { log |
trap | debugging } { boot |
date | none }
Use the command...
system-view
info-center enable
info-center logbuffer
[ channel { channel-number |
channel-name } | size
buffersize ]*
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
info-center timestamp { log |
trap | debugging } { boot |
date | none }
Use the command...
system-view
1-13
Remarks
Optional
By default, the switch uses
information channel 3 to output
trap information to the trap
buffer, which can holds up to
256 items by default.
Optional
Refer to Table 1-4 for the
default output rules of system
information.
Optional
By default, the time stamp
format of the output trap
information is date.
Remarks
—
Optional
Enabled by default.
Optional
By default, the switch uses
information channel 4 to output
log information to the log buffer,
which can holds up to 512
items by default.
Optional
Refer to Table 1-4 for the
default output rules of system
information.
Optional
By default, the time stamp
format of the output log
information is date.
Remarks
—