Setting The Priority Of Protocol Packets - 3Com 4200G 12-Port Configuration Manual

Setting the Priority of Protocol Packets

Refer to Protocol Priority
Configuration prerequisites
The protocol type has been determined.
The priority type (IP or DSCP) and priority value have been determined.
Configuration procedure
Follow these steps to set the priority of the specific protocol packets:
To do...
Enter system view
Set the priority of the
specific type of protocol
packets
36 : 7
37 : 7
38 : 7
39 : 7
40 : 0
41 : 0
42 : 0
43 : 0
44 : 0
45 : 0
46 : 0
47 : 0
48 : 5
49 : 5
50 : 5
51 : 5
52 : 5
53 : 5
54 : 5
55 : 5
56 : 6
57 : 6
58 : 6
59 : 6
60 : 6
61 : 6
62 : 6
63 : 6
for information about priority of protocol packets.
Use the command...
system-view
protocol-priority
protocol-type
protocol-type
{ ip-precedence
ip-precedence | dscp
dscp-value }
—
Required
You can modify the IP precedence values
or DSCP values of the corresponding
protocol packets.
On a Switch 4200G, you can set the
priority for protocol packets of Telnet,
SNMP, and ICMP.
1-17
Remarks