3Com 4200G 12-Port Configuration Manual page 46

View Available operation
User interface Configure user
view interface parameters
FTP client Configure FTP client
view parameters
SFTP client Configure SFTP
view client parameters
MST region Configure MST
view region parameters
Configure cluster
Cluster view
parameters
Configure the RSA
public key for SSH
users
Public key
view
Configure the RSA or
DSA public key for
SSH users
Edit the RSA public
key for SSH users
Public key
Edit the RSA or DSA
editing view
public key for SSH
users
Define rules for a
Basic ACL
basic ACL (with ID
view
ranging from 2000 to
2999)
Define rules for an
Advanced advanced ACL (with
ACL view ID ranging from 3000
to 3999)
Define rules for an
Layer 2 ACL layer 2 ACL (with ID
view
ranging from 4000 to
4999)
RADIUS Configure RADIUS
scheme view scheme parameters
ISP domain Configure ISP
view domain parameters
Prompt example Enter method
Execute the
[Sysname-ui-aux user-interface
0] command in
system view.
Execute the ftp
[ftp] command in user
view.
Execute the sftp
command in
sftp-client>
system view.
Execute the stp
[Sysname-mst-re region-configurat
gion] ion command in
system view.
Execute the
[Sysname-cluster
cluster command
]
in system view.
Execute the rsa
[Sysname-rsa-pu peer-public-key
blic-key] command in
system view.
Execute the
[Sysname-peer-p public-key peer
ublic-key] command in
system view.
[Sysname-rsa-ke
Execute the
y-code]
public-key-code
begin command in
[Sysname-peer-k
public key view.
ey-code]
Execute the acl
[Sysname-acl-
number command
basic-2000]
in system view.
Execute the acl
[Sysname-acl-ad
number command
v-3000]
in system view.
Execute the acl
[Sysname-acl-eth
number command
ernetframe-4000]
in system view.
Execute the
[Sysname-radius- radius scheme
1] command in
system view.
Execute the
[Sysname-isp-aa
domain command
a123.net]
in system view.
5-9
Quit method
Execute the
peer-public-key
end command
to return to
system view.
Execute the
public-key-cod
e end command
to return to
public key view.
Execute the quit
command to
return to system
view.
Execute the
return
command to
return to user
view.