3Com 4200G 12-Port Configuration Manual page 642

To do...
Configure the source
port
Configure the test type
Configure the number of
probes per test
Configure the automatic
test interval
Configure the probe
timeout time
Configure the maximum
number of history
records that can be
saved
Configure the type of
service
Start the test
Display test results
8) Configuring UDP test on remote-ping client
Follow these steps to configure UDP test on remote-ping client:
To do...
Enter system view
Enable the
remote-ping client
function
Create a remote-ping
test group and enter
its view
Configure the
destination address
Use the command...
source-port port-number
test-type { tcpprivate |
tcppublic }
count times
frequency interval
timeout time
history-records number
tos value
test-enable
display remote-ping
results [ admin-name
operation-tag ]
Use the command...
system-view
remote-ping-agent enable
remote-ping
administrator-name
operation- tag
destination-ip ip-address
1-12
Remarks
Optional
By default, no source port is specified.
Required
By default, the test type is ICMP.
Optional
By default, one probe is made per time.
Optional
By default, the automatic test interval is
zero seconds, indicating no automatic
test will be made.
Optional
By default, a probe times out in three
seconds.
Optional
By default, the maximum number is 50.
Optional
By default, the service type is zero.
Required
Required
The display command can be executed
in any view.
Remarks
—
Required
By default, the remote-ping client function
is disabled.
Required
By default, no test group is configured.
Required
This IP address and the one configured on
the remote-ping server for listening service
must be the same.
By default, no destination address is
configured.