Save; Preferences - Akai MPCX User Manual

Save

To save the project, tap the disk icon at the top of the
touchscreen. Alternatively, press Shift+Browse/Save. If you
have already saved the project, your changes will be saved.
If you have not saved the project yet, use the Save window
to save the project:
To select the storage device you want to view, tap it
in the Storage column on the left. Internal is the MPC
X's internal drive. MPC Documents is a shortcut to the
MPC Documents folder on the internal drive. If you
have storage devices connected to MPC X's USB ports
or SD card slot, they will appear in this column, as well.
To enter a folder, double-tap it. Alternatively, turn the
data dial or use the –/+ buttons to move through the list,
and press the center cursor or Enter to enter a folder.
You can also tap one of the five folder buttons in the
upper-right to jump immediately to those pre-assigned
file paths (see Modes > Browser
To create a new folder, tap New Folder, use the virtual keyboard that appears to enter a name, and then tap Do
It. You will immediately enter the new folder.
To move up one folder level, tap the folder/ icon.
To name the file, tap the File Name field at the bottom of the touchscreen, and use the virtual keyboard that appears.
To save the file, tap Save.
To cancel and return to the Menu, tap Cancel. Alternatively, tap the  icon in the upper-left corner.

Preferences

To return to the Menu, tap the  icon in the upper-left
corner. Any changes you have made in the Preferences will
be retained.
To restore your MPC X's default settings, tap Reset. In
the screen that appears, tap OK to continue or Cancel to
return to the Preferences. In the next window, tap Save to
save your current project before restoring the default
settings; tap Cancel to return to the Preferences; or tap
Don't Save to restore the default settings without saving
your current project.
To enter Update Mode, press and hold Shift and tap
Update. In the screen that appears, tap Save to save your
current project before entering Update Mode; tap Cancel
to return to the Preferences; or tap Don't Save to enter
Update Mode without saving your current project.
Info
This screen shows current information about your MPC X: its current firmware version, which includes its standalone
operating system (MPC Firmware); its hardware Serial Number; and its current firmware for the Control Surface.
Auto Save
The settings on this screen determine if (and how) projects are automatically saved.
Enabled: When enabled, MPC X will automatically save your current project after each Timeout interval. When
disabled, MPC X will not automatically save your project; you may save only manually.
Timeout: Use this field to select how often your project will automatically save.
to learn how to do this).
50