Trim Mode - Akai MPCX User Manual

Trim Mode

We recommend using Trim Mode to simply crop the end/ends from a sample.
To enter Trim Mode, tap the Trim/Chop button in
the lower-left corner so it says Trim.
Use the Start and End fields to set the position of
the start point and end point of the sample
(respectively). Alternatively, tap and drag the start
(S) or end (E) marker left or right, or use the first
column of Q-Link knobs (Start X1__) to adjust the
start point or the second column of Q-Link knobs
(End X1__) to adjust the end point.
Trim Mode includes a loop function. When on, the
region of the sample between the loop point and
end point will repeat. This is useful when trying to
find an ideal spot to begin the sample. The loop
cannot be earlier than the start point.
To adjust the loop point, do any of the following:
•
Use the Loop field.
•
Tap and drag the start (S) marker (if Loop Lock is on) or the loop marker (if Loop Lock is off).
•
Use the first column of Q-Link knobs (Start X1__; if Loop Lock is on) or the third column of Q-Link knobs
(Loop X1__; if Loop Lock is off). The top-most Q-Link knobs (13 and 15) provide coarse adjustment. The
bottom-most Q-Link knobs (1 and 3) provide fine adjustment.
To turn Loop Lock on or off, tap the Loop Lock button. When on, the loop point is the same as the start point.
When off, the loop point is independent from the start point and indicated by a separate loop marker.
To turn the loop function on or off, tap the Loop button to cycle between the four modes:
Off: The sample will not loop.
Forward: When the loop reaches its end point, it will start playing again from the loop point.
Reverse: When the loop reaches its end point, it will play in reverse. When it reaches the loop point again, it will
return to the end point and continue playing in reverse.
Alternating: When the loop reaches its end point, it will play in reverse. When it reaches the loop point again, it
will start playing forward again from the loop point.
To switch between Forward and off, press and hold Shift, and then tap Loop at the bottom of the touchscreen.
114