Akai MPCX User Manual page 45

To load a clip into a clip program:
1. Press Main to enter Main Mode.
2. Tap Edit Clips to view the pads and clip settings.
3. Press or tap a pad to select it (and play its assigned
samples, if any). The pad in the touchscreen will be lit
red, and its number will appear in the Pad field.
4. Tap the Sample field, and then use the data dial or –/+
buttons to select a clip. Alternatively, double-tap the
Sample field, and then tap a clip to select it.
To clear the assigned clip from a selected pad,
repeat Step 4, but select None.
To assign clips to additional pads, repeat Steps 3–4.
Alternatively, assign clips in a clip program this way:
1. Press Browse to show the Browser. Find and select a
clip, and then tap Load to load it to the program. Repeat
this for any other clips you want to load into the project.
(See Modes > Browser
Browser specifically.)
2. Tap Sample Assign to view the pads and project's
sample pool.
3. Tap Assign Mode so it is selected (tapping an item in
the sample pool will now assign it automatically to the
current pad). be lit green.
4. In the Sample Pool list, tap a clip to assign it to the pad.
Alternatively, use the data dial or –/+ buttons to assign
a clip and/or change the assigned clip.
To clear the assigned clip from a selected pad, press
the center cursor or Enter.
To assign clips to additional pads, repeat Steps 4–5.
to learn more about using the
45