Cv Programs - Akai MPCX User Manual

CV Programs

A CV program lets you send your control voltage (CV) signals
to an external MIDI device like a synth or drum machine that
uses CV.
To create a CV program:
1. Press Main to enter Main Mode.
2. Next to the Track field, tap the CV icon, which indicates a CV program.
3. If the project does not contain a CV program yet, a new CV program (named CV, appended with a number) will
be added automatically to the project and appear in the Program field below.
If the project already contains a CV program, it will be selected automatically and appear in the Program field
below.
To create another CV program, tap the + icon above the Program field. A new CV program will be created and
appended with a number (e.g., CV 002).
4. There are five additional settings to configure for a CV program: the note tracking (Note), the CV Port, the Gate
Port, the modulation wheel (Mod Wheel), and Velocity Port.
To rename the program, tap the cursor icon on the right edge of the Program section. Use the virtual
keyboard that appears to enter a new name, and then tap Do It to confirm or the gray bar at the top of the
touchscreen to cancel.
48