Akai MPCX User Manual page 67

Programs
You can set the send levels for programs in the Channel Mixer only.
To set the send levels for a program:
1. In the Channel Mixer, set the Mixer field in the upper-left
corner to Programs.
2. Tap the Send tab at the bottom of the touchscreen (tap
it multiple times to select a different send level).
3. In the touchscreen, tap the pad that corresponds to the
desired program. Alternatively, double-tap the Program
field below the Mixer field.
4. To set the send level, use the data dial or –/+ buttons.
To make finer adjustments, double-tap the pad and
adjust the larger version of the slider that appears.
Submixes
You can set the send levels for submixes in the Channel Mixer only.
Important: Submixes are available only while using MPC X in Controller Mode with the desktop version of the MPC
software.
To set the send levels for a submix:
1. In the Channel Mixer, set the Mixer field in the upper-left
corner to Submixes.
2. Tap the Send tab at the bottom of the touchscreen (tap
it multiple times to select a different send level).
3. In the touchscreen, tap the pad that corresponds to the
desired submix. Alternatively, double-tap the Submix
field below the Mixer field.
4. To set the send level, use the data dial or –/+ buttons.
To make finer adjustments, double-tap the pad and
adjust the larger version of the slider that appears.
67