Akai MPCX User Manual page 64

Submixes
You can load up to four insert effects to each submix. You can do this in the Channel Mixer only.
Important: Submixes are available only while using MPC X in Controller Mode with the desktop version of the MPC
software.
To load a submix insert effect:
1. Set the Mixer field in the upper-left corner to Submixes.
2. In the touchscreen, tap the pad that corresponds to the
desired program. Alternatively, double-tap the Submix
field below the Mixer field and tap the desired program.
3. Tap the area under Inserts, and then use the screen that
appears to load or edit effects. Alternatively, tap the
Insert tab at the bottom of the touchscreen (tap it
multiple times to select a different insert slot), and then
double-tap the desired pad in the touchscreen. You
could also use the data dial or –/+ buttons to select an
effect immediately.
Masters
You can load up to four insert effects to each master output (a stereo pair of channels: Outputs 1/2, Outputs 3/4,
etc.). You can do this in Main Mode or the Channel Mixer.
To load a master insert effect in Main Mode:
1. If the channel strip is not already shown, tap the small
eye icon below the Project field to show it.
2. Tap the crown icon at the top of the channel strip. The
channel strip will now show settings for the current
master output.
3. Use the Outputs field at the top of the channel strip to
select the desired master output (Outputs 1/2, Outputs
3/4, etc.).
4. Tap the area under Inserts, and then use the screen that
appears to load or edit effects.
To load a master insert effect in the Channel Mixer:
1. Set the Mixer field in the upper-left corner to Masters.
2. In the touchscreen, tap the pad that corresponds to the
desired master output (Outputs 1/2, Outputs 3/4, etc.).
Alternatively, double-tap the Outputs field below the
Mixer field.
3. Tap the area under Inserts, and then use the screen that
appears to load or edit effects. Alternatively, tap the
Insert tab at the bottom of the touchscreen (tap it
multiple times to select a different insert slot), and then
double-tap the desired pad in the touchscreen. You
could also use the data dial or –/+ buttons to select an
effect immediately.
64