Akai MPCX User Manual page 90

While viewing MIDI programs, the MIDI Program field
shows the name of the program.
Use the MIDI Port field to select the port over which
the program sends its MIDI data.
Note: You also have to configure the MIDI ports in the
Preferences. To see user guide in the MPC software
and learn how to do this, click the Help menu, select
MPC Help, and select MPC User Manual.
Use the Program Ch field to select the program
change message the program sends out.
Use the MIDI Ch field to select the MIDI channel over
which the program sends its MIDI data.
Use the Bank MSB and Bank LSB fields to select the
messages for Most Significant Byte and Least Significant
Byte (respectively) that the program sends out.
While viewing CV programs, the CV Program field shows
the name of the program.
Use the Note field to select the note tracking—the
program's note track: Lowest, Highest, or Last.
Use the CV Port field to select the CV port the program
is using.
Use the Gate Port field to select the Gate port the
program is using.
Use the Mod Wheel field to select the CV port used by
a modulation wheel on an external controller.
Use the Velocity Port field to select CV port the
program will use to transmit velocity values.
To edit the program, tap the pencil icon on the right edge
of the section. The Program Edit/Copy window will open.
You can use any of these functions as described below.
To return to Main Mode, tap Cancel or the left arrow
() in the upper-left corner of the touchscreen.
Alternatively, press Main.
To edit the name of the program, tap the top of the
touchscreen and use the virtual keyboard that appears.
The Delete function erases all events from the track and
resets all of its settings.
To confirm your choice, tap Clear.
To return to the previous screen, tap Cancel.
The Duplicate function immediately creates an identical
program. The duplicate program will use the same name
but appended with a number (e.g., Program 002).
90