Program - Akai MPCX User Manual

Program

In the Program Q-Link Edit Mode, the Q-Link knobs control 16 parameters within the currently selected program or
audio track.
Next to the top row of Q-Link knobs in the touchscreen, tap one of these tabs to select the type of parameters you
want to control with the Q-Link knobs:
Mixer: general mixer parameters
Program: program parameters
Insert 1–4: parameters for its program insert effects
Use the Type selector to determine whether the Q-Link knobs will control the parameters of the entire program (Program)
or for a single pad (Pad).
To select a program, use the Track field at the top of the touchscreen to select a track that uses it. The program
name will appear in the Program field next to the top row of Q-Link knobs in the touchscreen.
To select a pad (if Type is set to Pad), use the Pad field.
Use the Parameter field to select the parameter you want to control with the Q-Link knobs.
Tap the Momentary checkbox to turn momentary behavior on or off.
When on, moving the Q-Link knob will adjust its parameter, but the parameter will immediately return to its original
position (when you turned Momentary on) when you release the Q-Link knob.
When off, moving the Q-Link knob will adjust its parameter, and the parameter will remain at its new setting when
you release the Q-Link knob.
194